Radio Feather nRF52840 + QR Kit for Simagic

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Dupont Cable 2 pins 20 cm  (pack of 10)

Red Quick Release.

Silver Quick Release.

Bronze Quick Release.

Black Quick Release.

Blue Quick Release

Micro USB extension, panel mount

Length : 30 cm

Connectors : micro-USB - micro-USB

Holes spacing  : 17 mm

Screws : M3 12 mm provided

NRF52840 micro-controler based dongle.

This dongle can be used as a radio receiver and is compatible with all our radio boards (based on NRF24 modules or NRF52840).

The NRF52840 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

A standard Node Blue package is included with the dongle.

Dimensions : 

- Length : 43 mm (including USB connector)

- Width : 18 mm

- Height : 9 mm

This board enables connecting buttons, switches, encoders, potentiometers,  rotary switches, joysticks  and various sensors, to easily deploy wireless solutions.

An battery charging circuit allows you to power the board with a battery for embedded applications, along with an internal connexion in order to measure precisely the battery voltage, so you will know the charge that's left.

You will have access to 22 I/Os, including 7 analog inputs with a 12 bits ADC. One additionnal digital input is available for the on board user switch, as well as an "NFC" pad under the board if another input is needed. The inputs are 3.3 V and are not 5 V tolerant. The heart of this board is the NRF52840, the most suitable microcontroller on the market for embedded systems. Clocked at 64 MHz, it also offers 2 SPI ports, 1 I2C port , and 1 serial port. Like all the boards we propose, we have enhenced the kernel in order to offer as much features as possible. 

Note : This board is not using the bluetooth protocol, you will have to use a NrfDongle dongle to make it use it.

Drivers Download : Adafruit Drivers

Male Header

Number of rows : 1

Number of pins : 40

Pitch : 2.54 mm

Pins height : 11.5mm

Male Header

Number of rows : 1

Number of pins : 40

Pitch : 2.54 mm

Pins height : 11.5mm