Radio SamD21 WB + QR Kit for Moza

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Dupont Cable 2 pins 20 cm  (pack of 10)

NRF52840 micro-controler based dongle.

This dongle can be used as a radio receiver and is compatible with all our radio boards (based on NRF24 modules or NRF52840).

The NRF52840 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

A standard Node Blue package is included with the dongle.

Dimensions : 

- Length : 43 mm (including USB connector)

- Width : 18 mm

- Height : 9 mm

Red Quick Release.

Silver Quick Release.

Bronze Quick Release.

Black Quick Release.

Blue Quick Release

USB-C extension, panel mount

Length : 30 cm

Connectors : USB-C - USB-C

Holes spacing  : 17 mm

Screws : M3 12 mm provided

Dupont Cable 2 pins 10 cm  (pack of 10)

The Bodac is a system that allows to implement several buttons on a single analog input, with the possibility to have several buttons pressed at the same time. The "usual" systems (resistors ladders or matrix without diodes), do not allow to press several buttons at a time.

The benefit of the Bodac compared to a button matrix with diodes is a simpler wiring: a resistance between each button pin, and a single wire between each button. The optional cable incorporates the common resistance at the connector level, allowing only 2 wires to come out of the board.

This pack of 1% precision resistors allows to create a Bodac with 5 buttons or less.

WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module.

To start easily, you can refer to this NodeBlue example : https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/BodacHID.txt

The ElectroSeed SamD21 WB Radio board offers 31 inputs/outputs, including 14 analog inputs. 4 analog inputs have pull-up resistors, which allows direct connection of bodacs, thus adding the possibility of connecting 20 additional buttons.

5v power is available (if powered from a Moza or Simagic or other QR providing 5v) around the serial port to connect a Nextion screen or a 7-segment display. The 5v is also exposed to connect RGB leds. Screen and leds are managed with SimHub software, and requires an NRF Dongle to communicate with the PC.

Attention : this card is intended for use with a Moza, Simagic base or other system with induction power supply providing 5V. For use with battery, you will need to go to another card managing battery charging (Feather or XIAO Ble), or a card equipped with a 5V booster to power a screen or many LEDs (MMWB)

The following connectors are also proposed :

• A 5v power connector to connect to the Simagic or Moza bases (thanks to our Simagic and Moza Quick Releases), the radio version allowing native radio communication with Simagic bases (inputs only, 32 functions) or with Moza bases (inputs only, 64 functions)
• A 4-pin JST 2.0 connector to easily connect an aviation connector or a panel mount USB connector for firmware updates.
• A USB-C connector to program the board or connect a USB extension.

If you choose a customized firmware option, a NodeBlue package will be included with the board, so you can have any configuration you need. A configuration form will be sent after your order, so you can specify the desired programming. The board will be programmed accordingly and the wiring schematics will be provided.  You can check here if your configuration is possible.