Radio SamD21 WB + QR Kit for Simagic

1.20 € inc. VAT
1.00 € ex. VAT
Quantity in stock : 3
Options

Firmware :
Dongle :
Quick Release :
Bodacs :

This kit contains everything you need to build a custom wireless steering wheel for your Simagic Base.

 

Kit contents :

- QR with a power kit compatible with Simagic bases (5v power supply connexion)

SamD21 WB Radio board

NRF52Dongle (option)

- USB-C extension , so you'll be able to reprogram the board without having to open your wheel.

- 10 20cm dupont cables and 10 10cm dupont cables so you can connect your buttons, rotary encoders, etc.

 

Dongle is needed. Only one dongle is needed for all your wheels. Display is driven by SimHub software. If you want native communication with the base, you must use the NRF5840 Feather or XIAO kit. 

Options
 
Board
ElectroSeed SamD21 WB Radio
ElectroSeed SamD21 WB Radio

The ElectroSeed SamD21 WB Radio board offers 31 inputs/outputs, including 14 analog inputs. 4 analog inputs have pull-up resistors, which allows direct connection of bodacs, thus adding the possibility of connecting 20 additional buttons.

5v power is available (if powered from a Moza or Simagic or other QR providing 5v) around the serial port to connect a Nextion screen or a 7-segment display. The 5v is also exposed to connect RGB leds. Screen and leds are managed with SimHub software, and requires an NRF Dongle to communicate with the PC.

 

Attention : this card is intended for use with a Moza, Simagic base or other system with induction power supply providing 5V. For use with battery, you will need to go to another card managing battery charging (Feather or XIAO Ble), or a card equipped with a 5V booster to power a screen or many LEDs (MMWB)

 

The following connectors are also proposed :

  • A 5v power connector to connect to the Simagic or Moza bases (thanks to our Simagic and Moza Quick Releases), the radio version allowing native radio communication with Simagic bases (inputs only, 32 functions) or with Moza bases (inputs only, 64 functions)
  • A 4-pin JST 2.0 connector to easily connect an aviation connector or a panel mount USB connector for firmware updates.
  • A USB-C connector to program the board or connect a USB extension.

 

If you choose a customized firmware option, a NodeBlue package will be included with the board, so you can have any configuration you need. A configuration form will be sent after your order, so you can specify the desired programming. The board will be programmed accordingly and the wiring schematics will be provided.  You can check here if your configuration is possible.

 
Firmware
Customized without display
Customized without display

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

 

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Customized with display
Customized with display

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

 

NodeBlue Wiki : www.nodeblue.org/wiki_fr

 
Cable Pack 2
Dupont Cable 2 pins 20cm x10
Dupont Cable 2 pins 20cm x10

Dupont Cable 2 pins 20 cm  (pack of 10)

 
Induction Power
Power Kit for Simagic Bases
Power Kit for Simagic Bases
Kit to be installed in QR, allowing to get the power supply from a Simagic base. The vertical PH 2.0 connector, very easy to access, is of the same format as all our radio  boards and allows direct connection using the provided cable.
 
 
 
Contents of the kit:
 
 
 
- 2 M3 x 6mm BHC screws
 
Dongle
NRF Dongle
NRF Dongle

NRF52840 micro-controler based dongle.

 

This dongle can be used as a radio receiver and is compatible with all our radio boards (based on NRF24 modules or NRF52840).

 

The NRF52840 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

 

A standard Node Blue package is included with the dongle.

 

 

Dimensions : 

- Length : 43 mm (including USB connector)

- Width : 18 mm

- Height : 9 mm

 
Quick Release
Quick Release Red
Quick Release Red

Red Quick Release.

Quick Release Silver
Quick Release Silver

Silver Quick Release.

Quick Release Bronze
Quick Release Bronze

Bronze Quick Release.

Quick Release Black
Quick Release Black

Black Quick Release.

Quick Release Blue
Quick Release Blue

Blue Quick Release

 
Connector
USB-C Extension 30cm panel
USB-C Extension 30cm panel

USB-C extension, panel mount

Length : 30 cm

Connectors : USB-C USB-C

Holes spacing  : 17 mm

Screws : M3 12 mm provided

 
Cable Pack 1
Dupont Cable 2 pins 10cm x10
Dupont Cable 2 pins 10cm x10

Dupont Cable 2 pins 10 cm  (pack of 10)

 
Bodacs
Bodac Pack
Bodac Pack

The Bodac is a system that allows to implement several buttons on a single analog input, with the possibility to have several buttons pressed at the same time. The "usual" systems (resistors ladders or matrix without diodes), do not allow to press several buttons at a time.

The benefit of the Bodac compared to a button matrix with diodes is a simpler wiring: a resistance between each button pin, and a single wire between each button. The optional cable incorporates the common resistance at the connector level, allowing only 2 wires to come out of the board.

This pack of 1% precision resistors allows to create a Bodac with 5 buttons or less.

 

WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module.

To start easily, you can refer to this NodeBlue example : https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/BodacHID.txt