Ioni Pro HC

238.80 € inc. VAT
199.00 € ex. VAT
IONI Pro HC is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers.
"Pro" and "HC" means extended functionalities and current drive range for this model (25A).
IONI Pro HC allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).
Applications of such control methods include:
  • Position control, for CNC, robotics and 3D printing
  • Velocity control, for spindles or feeders
  • Force / torque control, for simulation devices with force feedback, such as racing simulator wheels
Command modes:
Commands to IONI drive can be delivered in many formats and from many sources, such as PC, PLC, microcontroller (i.e. Arduino, MBED and OEM boards) or embedded computers like Raspberry Pi. IONI understands several forms of setpoint commands:
  • Step & direction digital signals (typical stepper drive interface, good for position control)
  • Analog +/-10V signal (good for speed or torque control)
  • PWM signal (good for speed or torque control)
  • RS485 serial bus (talks SimpleMotion V2 bus protocol, open source library available)
Servo motor requirements:
  • Permanent magnet brush-DC, AC, brushless or linear motor
  • Motor voltage rating 12-60 VDC (IONI supply voltage is 5 – 55 VDC)
  • Motor current rating 0.2 – 15A (IONI) / 18A (IONI Pro) / 25A (IONI Pro HC)
  • Servo motor must be equipped with an incremental encoder (position sensor) with resolution of 100 to 1000000 pulses per revolution.
Stepping motor requirements:
  • Two-phase stepping motor, no feedback device needed. 
  • Can be used in position and velocity control mode. Torque control mode not possible with stepper.
  • Current rating : 0.5 – 15A (IONI) / 18A (IONI Pro) / 25A (IONI Pro HC) 
600W 48V DC Power Suply
600W 48V DC Power Suply
Rated Load : 600W
Output Voltage : DC 48V (Constant Voltage)
Output Current : 0-12.5A
Input Voltage : AC 110v/220v+/-15%
Mige 130ST - M10010
Mige 130ST - M10010

BLDC Motor equiped with a 10000 PPR quadratic encoder (40000 positions / revolution).

Rated Power :  1 KW

Rated Voltage :  220 V

Rated Current :  4.5 A

Rated Speed :  1000 tr/mn

Holding Torque :  10 N.m

Peak Torque : 20 N.m

Torque coefficient: 2.2 N.m/A

Weight : 11.5 Kg

Delivered with a 3 m shielded encoder cable, and a 3 m shielded power cable.

IoniCube 1x
IoniCube 1x

IONICUBE 1X is a single axis motherboard for IONI Servo Drives.

It provide one slot for IONI drive as well as terminals and connectors for

  • motor power
  • feedback devices
  • Inputs/outputs
  • 2 SimpleMotion V2 connectors

IONICUBE 1X has been designed with robotics and automation systems in mind.

SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel.
For full details, see SimuCUBE product page.