Angle sensor AS5600 ElectroSeed

Options

I2C Connector :
Analog Connector :
Contactless AS5600 12 bits angle sensor, delivered with a magnet.
 
Allows you to make pedals or any other element requiring a robust angle sensor.
 
The angle range can be 360° but can also be reduced down to 18° while keeping the full precision of the sensor.
 
Available interfaces are analog or I2C.We recommand I2C, since it allows to do the sensor calibration (choice of the angle interval), and also the signal will be more protected against noise.
 
 
Power voltage : 5V or 3.3V, configured by a solder jumper.
 
 
Board dimensions: 20 mm x 20 mm, thickness 3.2 mm (including pcb and components)
 
Magnet dimension : Diameter 6mm, height 2.5 mm
 
Magnet to sensor distance : min 0  mm, max 5 mm
 
 
 
SchematicsPinoutAccessories

Top View :

 

Jumper SJ1 : Power supply choice

soldered => 3.3V

not soldered => 5V

 

 

Jumper SJ2 : Programming of the angle range

soldered => with OUT pin (see documentation page  23 and 32)

not soldered => with I2C interface (see documentation page  22,24 and 32)

Dupont plug Cable 3 wires 20cm Female Female
Dupont plug Cable 3 wires 20cm Female Female

Dupont Cable 3 wires Female-Female

Number of pins : 3

Length : 20 cm

Connector :  : 1x3 - 1x3

Dupont Cable 4 wires 20 cm Female - Female
Dupont Cable 4 wires 20 cm Female - Female

Dupont Cable 4 wires 20 cm

Number of pins : 4

Connector : 1x4 - 1x4

Length : 20 cm

Dupont plug Cable 3 wires 30cm Female Female
Dupont plug Cable 3 wires 30cm Female Female

Dupont Cable 3 wires Female-Female

Number of pins : 3

Length : 30 cm

Connector :  : 1x3 - 1x3