TBB_01 Board

Options

Firmware :
Board Plate :
Bodacs :
Battery charge circuit :
IO Headers :
Radio Module :
Teensy :

Breakout board for Teensy-LC and Teensy-3.2 (assembled)

 

This board enables connecting buttonsswitchesencoders, potentiometers,  rotary switchesjoysticks  and various sensors, and propose a range of radio modules to easily deploy wireless solutions.

 

Several connectors give access to various peripherals, including a serial connector to manage a Nextion screen and 7 segments displays, a SPI connector to manage an OLED screen, and a 3 pin connector to drive RGB Leds.

 

An optionnal battery charging circuit can be chosen you to power the board with a battery for embedded application, along with an external voltage reference in order to measure precisely the battery voltage, so you will know the charge that's left.

 

- With a Teensy LC, you will have access to 27 I/Os (22 when using a radio module), including 12 analog inputs (16 bits), and a amplified output on the pin 17 to drive RGB Leds. The inputs are 3.3 V and are not 5 V tolerant. The Teensy LC operates at 48 MHz max.

- With a Teensy 3.2, you will have access to 37 I/Os (32 when using a radio module), including 20 analog inputs (16 bits) and 34 digital I/O. All digital pins are tolerant to 5 V. Teensy 3.2 operates at 72 MHz max but can be overclocked at 120 Mhz.

DescriptionSchematicsPinoutDownloadsTutorialsDimensionsOptionsAccessories

Connectors  :

  • Radio modules
  • SPI Port
  • Fanatec Wheels
  • Asynchronous Serial Port
  • RGB Leds (Teensy LC) or Battery for real time clock (Teensy 3.2)
  • 2 JST 2.0 Power supply

 

This board can be powered by Teensy's micro-USB or a JST 2.0mm connector, or with a cable directly soldered to the board.

This board can be mounted in the Quick Release from ThomConcept or on any button plate.

A printed PLA support is included.

 

Teensy LC :

The Teensy LC operates at 48 MHz max. All inputs are 3.3V only and are not 5V tolerant. All outputs are 3.3V except D17 pin which is 5V. You will have access to 27 I/Os (22 when using a radio module).
 
  • 22 Digital Inputs / Outputs : D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D15(A1), D16(A2), D17(A3), D18(A4), D19(A5), D20(A6), D21(A7), D22(A8), D23(A9), D24(A10), D25(A11), D26(A12)
  • 5 Digital Inputs / Outputs dedicated to SPI or radio module : D10(CE), D11(MOSI), D12(MISO, D13(SCK), D14(CS)
  • 12 Analog Inputs multiplexed on a 16 bits ADC : A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12
  • 1 Digital output amplified to 5V to drive RGB Leds
  • 1 Analog Output on a 12 bits DAC : A12
  • With the battery charging circuit, the A7 pin is used to measure the battery voltage, in order to evaluate the autonomy left.
 

Teensy 3.2 :

Teensy 3.2 operates at 72 MHz max but can be overclocked at 120 Mhz. All digital pins are tolerant to 5V, but analog inputs must stay under 3.3V. All outputs are 3.3V. You will have access to 37 I/Os (32 when using a radio module). Some pins are analog only (A10, A11, A12, A13 and A14).
 
  • 29 Digital Inputs / Outputs : D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D15(A1), D16(A2), D17(A3), D18(A4), D19(A5), D20(A6), D21(A7), D22(A8), D23(A9), D24, D25, D26(A15), D27(A16), D28(A17), D28(A18), D29(A19), D30(A20), D31(A21), D32
  • 5 Digital Inputs / Outputs dedicated to SPI or radio module : D10 (CE), D11(MOSI), D12(MISO, D13(SCK), D14(CS)
  • 12 Analog Inputs multiplexed on a 16 bits ADC : A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A13, A14, A15, A16, A17, A18, A19, A20
  • 1 Analog Output on a 12 bits DAC : A14
  • With the battery charging circuit, the A12 pin is used to measure the battery voltage, in order to evaluate the autonomy left.

 

Default programming (for Teensy LC) :

 

 

Default programming (for Teensy 3.2) :

 

 

Version with Standard Radio Module : Version with Tiny Radio Module :

 

 

Version with 8 mm headers for the Teensy : Version with 11.5 mm headers for the Teensy :

 

 

Height with dupont connectors : Version without support :

 

 

 
Firmware
 
Board Plate
TBB_01 Plate
TBB_01 Plate

3D PLA Printed plate for the TBB_01 board family.

 
Bodacs
 
Battery charge circuit
 
Board Version
TBB_01 PCB v1.5
TBB_01 PCB v1.5

Breakout board for Teensy-LC and Teensy-3.2 (PCB only)

This board enables connecting buttons/encoders and various sensors, and propose a range of radio modules to easily deploy wireless solutions. Connectors :

  • Radio modules
  • SPI port
  • I2C port
  • Serial Port
  • Fanatec wheels
  • Neopixel leds
  • JST 2.0mm Power connector
  • Battery charge circuit
 
IO Headers
Straight IO Headers for TBB_01
Straight IO Headers for TBB_01

Straight headers kit for the TBB_01 board

1 straight header 2x16 pins

1 straight header 3x16 pins

Right Angle IO Headers for TBB_01
Right Angle IO Headers for TBB_01

Right angle headers kit for the TBB_01 board

1 right angle header 2x16 pins

1 right angle straight header 3x16 pins

 
Radio Module
nRF24L01 Module
nRF24L01 Module

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : embeded on the board

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

nRF24L01 Module - tiny
nRF24L01 Module - tiny

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : embeded on the board

Max BandWitdh : 2 Mbits/s

Interface : SPI

Monting : SMD

nRF24L01 Module + Straight Antenna
nRF24L01 Module + Straight Antenna

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : 1/4th wave, provided

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

nRF24L01 Module + Amplifier + Antenna
nRF24L01 Module + Amplifier + Antenna

nRF24L01 Module - 2.4GHz

IC : nRF24L01+, power amplifier

Frequency : 2.4Ghz

Antenna : 1/4th wave, provided

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

 
Teensy
Teensy LC
Teensy LC

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 13 16 bit analog input and a 12 bits analog output, 3 hardware Serial port, 1 SPI port and 2 I2C ports, USB, and a total of 27 I/O pins. See the technical specifications and pinouts below for details.

Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features.

Dimensions : 35.6 mm x 17.8 mm

Teensy 3.2
Teensy 3.2

Teensy-3.2 delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M4 processor at 72 MHz, 256 K Flash, 64 K RAM, 21 16 bit analog input and a 12 bits analog output, 3 hardware Serial ports, SPI & I2C, USB, and a total of 39 I/O pins. See the technical specifications for details.

Teensy-3.2 maintains the same form-factor as Teensy LC, with most pins offering similar peripheral features.

Dimensions : 35.6 mm x 17.8 mm

JST 2.0 Cable 2 pins 15cm
JST 2.0 Cable 2 pins 15cm

JST 2.0mm Cable

Number of pins : 2

Length : 15cm

Male Connector : seamed on the cable

Dupont Cable 2 pins 20cm x10
Dupont Cable 2 pins 20cm x10

Dupont Cable 2 pins 20 cm  (pack of 10)

JST 2.0 Cable 8 pins 20cm
JST 2.0 Cable 8 pins 20cm

JST 2.0mm Cable Male - Male

Number of pins : 8

Length : 20 cm

Connectors seamed on the cable

micro USB Cable Double Ferrite 2m
micro USB Cable Double Ferrite 2m

USB cable with 2 ferrites which limits electromagnetic interferences.

Length : 2 m

Connector : micro-USB

micro USB Retractable Cable
micro USB Retractable Cable

USB Retractabe cable

Length : 30 cm

Connector : micro-USB

Leo24 Dongle
Leo24 Dongle

ATmega32u4 micro-controler based board, compatible with Arduino Leonardo  (assembled).

It has 9 digital input/output pins (of which 5 can be used as 10 bits analog inputs).

The ATmega32u4 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

The board can be powered by USB, or with an external 5V power supply. The board is like a USB dongle, so it doesn't need any USB cable to be connected to a PC.

Dimensions : 20 mm x 13 mm

SMA Extension 15 cm
SMA Extension 15 cm

SMA extension cable, length 15 cm