TBB_01 Board

Options

Board Plate :
IO Headers :
Radio Module :
Teensy headers :
Teensy :

Breakout board for Teensy-LC and Teensy-3.2 (assembled)

 

This board enables connecting buttons/encoders and various sensors, and propose a range of radio modules to easily deploy wireless solutions.

Several connectors give access to various peripherals.

 

- With a Teensy LC, you will have access to 22 inputs including 12 that can be analog, with a bonus amplified output on the pin 17 to drive Neopixel LEDs for example. The inputs are 3.3 V and are not 5 V tolerant. The Teensy LC operates at 48 MHz max.

- With a Teensy 3.2, you will have access to 32 inputs, 19 of which can analog 28 digital. All digital pins are tolerant to 5 V. Teensy 3.2 operates at 72 MHz max but can be overclocked at 120 Mhz.

DescriptionSchematicsPinoutDownloadsTutorialsDimensionsOptionsAccessories

Connectors  :

  • Radio modules
  • SPI Port
  • Fanatec Wheels
  • I2C Port
  • Asynchronous Serial Port
  • NeoPixel Leds (v1.2 + Teensy LC) or Battery for real time clock (v1.2 + Teensy 3.2)
  • JST 2.0 Power supply

 

This board can be powered by Teensy's micro-USB or a JST 2.0mm connector (v1.2), or with a cable directly soldered to the board.

This board can be mounted in the Quick Release from ThomConcept or on any button plate.

A printed PLA support is included.

 

Teensy LC Inputs / Outputs :

22 Inputs / Outputs Numériques : D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D15(A1), D16(A2), D17(A3), D18(A4), D19(A5), D20(A6), D21(A7), D22(A8), D23(A9), D24(A10), D25(A11), D26(A12)

12 Analog Inputs  : A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12

1 Analog Output (DAC) : D26(A12)

 

Teensy 3.2 Inputs / Outputs :

14 Digital Inputs / Outputs : D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D15(A1), D16(A2), D17(A3), D18(A4), D19(A5), D20(A6), D21(A7), D22(A8), D23(A9), D24, D25, D26(A15), D27(A16), D28(A17)

20 Analog Inputs : A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, A13, A14, A15, A16, A17, A18, A19, A20

1 Analog Output  (DAC) : A14

 

 

 

Default programming (for Teensy LC) :

 

Default programming (for Teensy 3.2) :

 

Version with Standard Radio Module : Version with Tiny Radio Module :

 

 

Version with 8 mm headers for the Teensy : Version with 11.5 mm headers for the Teensy :

 

 

Height with dupont connectors : Version without support :

 

 

 
Board Plate
TBB_01 Plate
TBB_01 Plate

3D PLA Printed plate for the TBB_01 board family.

 
Board Version
TBB_01 PCB v1.2
TBB_01 PCB v1.2

Breakout board for Teensy-LC and Teensy-3.2 (PCB only)

This board enables connecting buttons/encoders and various sensors, and propose a range of radio modules to easily deploy wireless solutions. Connectors :

  • Radio modules
  • SPI port
  • I2C port
  • Serial Port
  • Fanatec wheels
  • Neopixel leds
  • JST 2.0mm Power connector
 
IO Headers
Straight IO Headers for TBB_01
Straight IO Headers for TBB_01

Straight headers kit for the TBB_01 board

1 straight header 2x16 pins

1 straight header 3x16 pins

Right Angle IO Headers for TBB_01
Right Angle IO Headers for TBB_01

Right angle headers kit for the TBB_01 board

1 right angle header 2x16 pins

1 right angle straight header 3x16 pins

 
Radio Module
nRF24L01 Module
nRF24L01 Module

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : embeded on the board

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

nRF24L01 Module - tiny
nRF24L01 Module - tiny

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : embeded on the board

Max BandWitdh : 2 Mbits/s

Interface : SPI

Monting : SMD

nRF24L01 Module + Straight Antenna
nRF24L01 Module + Straight Antenna

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : 1/4th wave, provided

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

nRF24L01 Module + Amplifier + Antenna
nRF24L01 Module + Amplifier + Antenna

nRF24L01 Module - 2.4GHz

IC : nRF24L01+, power amplifier

Frequency : 2.4Ghz

Antenna : 1/4th wave, provided

Max BandWitdh : 2 Mbits/s

Interface : SPI

Mounting : 2x8 pins 0.1"

 
Teensy headers
Headers for Teensy LC 11.5mm
Headers for Teensy LC 11.5mm

Male and female headers for Teensy LC 11.5mm

2 male headers 1x14 pins

2 male headers 1x5 pins

2 11.5mm female headers 1x14 pins

2 11.5mm female headers 1x5 pins

Headers for Teensy LC 8mm
Headers for Teensy LC 8mm

Males and females headers for mounting Teensy LC.

Total Height : 8 mm

Plastic height : 5 mm

 

The kit contains :

  • 2 males headers 1x14 pins
  • 2 males headers 1x5 pins
  • 2 females headers 1x5 pins
 
Teensy
Teensy LC
Teensy LC

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 13 16 bit analog input and a 12 bits analog output, 3 hardware Serial port, 1 SPI port and 2 I2C ports, USB, and a total of 27 I/O pins. See the technical specifications and pinouts below for details.

Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features.

Teensy 3.2
Teensy 3.2

Teensy-3.2 delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M4 processor at 72 MHz, 256 K Flash, 64 K RAM, 21 16 bit analog input and a 12 bits analog output, 3 hardware Serial ports, SPI & I2C, USB, and a total of 34 I/O pins. See the technical specifications for details.

Teensy-3.2 maintains the same form-factor as Teensy LC, with most pins offering similar peripheral features.

JST 2.0 Cable 2 pins 15cm
JST 2.0 Cable 2 pins 15cm

JST 2.0mm Cable

Number of pins : 2

Length : 15cm

Male Connector : seamed on the cable

Female Connecter : for soldering

Dupont Cable 2 pins 25cm x10
Dupont Cable 2 pins 25cm x10

Dupont Cable 2 pins 25 cm  (pack of 10)

Nombre de pins : 2

Length : 25 cm

JST 2.0 Cable 8 pins 20cm
JST 2.0 Cable 8 pins 20cm

JST 2.0mm Cable Male - Male

Number of pins : 8

Length : 20 cm

Connectors seamed on the cable

micro USB Cable Double Ferrite 2m
micro USB Cable Double Ferrite 2m

USB cable with 2 ferrites which limits electromagnetic interferences.

Length : 2 m

Connector : micro-USB

micro USB Retractable Cable
micro USB Retractable Cable

USB Retractabe cable

Length : 30 cm

Connector : micro-USB

Leo24 Dongle
Leo24 Dongle

ATmega32u4 micro-controler based board, compatible with Arduino Leonardo  (assembled).

It has 9 digital input/output pins (of which 5 can be used as 10 bits analog inputs).

The ATmega32u4 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

The board can be powered by USB, or with an external 5V power supply. The board is like a USB dongle, so it doesn't need any USB cable to be connected to a PC.

SMA Extension 15 cm
SMA Extension 15 cm

SMA extension cable, length 15 cm