TBB_01 Radio Kit

Dupont Cable 2 pins 20 cm  (pack of 10)

JST 2.0mm Cable

Number of pins : 2

Length : 15cm

Male Connector : seamed on the cable

Dupont Cable 2 pins 10 cm  (pack of 10)

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Packages for using Node Blue. Packages are bound to a board, so you'll have to buy them for each board you wish to program. Only boards proposed on ElectroSeed shop are supported.

Standard parckage includes the modules listed in the description.

"Gaming Device" option allows to program the board so it will be seen by the PC as a standard gaming device (no drivers to install). To choose freely the device name, you must choose the Pro package.

"Display" option gives you access to all the modules that deals with display : RGB Leds, 7 segments displays, Nextion screens, TFT/Oleds/etc. screens.

NodeBlue Wiki : www.nodeblue.org/wiki_fr

Micro USB extension, panel mount

Length : 30 cm

Connectors : micro-USB - micro-USB

Holes spacing  : 17 mm

Screws : M3 12 mm provided

3D PLA Printed plate for the TBB_01 board family.

NRF52840 micro-controler based dongle.

This dongle can be used as a radio receiver and is compatible with all our radio boards (based on NRF24 modules or NRF52840).

The NRF52840 micro-controler includes an USB hardware controler which can be programmed to create a gaming device, a keyboard, a mouse, etc..

A standard Node Blue package is included with the dongle.

Dimensions : 

- Length : 43 mm (including USB connector)

- Width : 18 mm

- Height : 9 mm

Breakout board for Teensy-LC and Teensy-3.2 (PCB only)

This board enables connecting buttons/encoders and various sensors, and propose a range of radio modules to easily deploy wireless solutions. Connectors :

• Radio modules
• SPI port
• I2C port
• Serial Port
• Fanatec wheels
• Neopixel leds
• JST 2.0mm Power connector
• Battery charge circuit

Straight headers kit for the TBB_01 board

1 straight header 2x16 pins

1 straight header 3x16 pins

Right angle headers kit for the TBB_01 board

2 right angle straight header 3x16 pins

nRF24L01 Module - 2.4GHz

IC : nRF24L01+

Frequency : 2.4Ghz

Antenna : embeded on the board

Max BandWitdh : 2 Mbits/s

Interface : SPI

Monting : SMD

This board has been discontinued, it's been replaced by the SamD21 WB board, proposed here.

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 13 16 bit analog input and a 12 bits analog output, 3 hardware Serial port, 1 SPI port and 2 I2C ports, USB, and a total of 27 I/O pins. See the technical specifications and pinouts below for details.

Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features.

Dimensions : 35.6 mm x 17.8 mm

Drivers Download : Teensy Drivers

Teensy-3.2 delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M4 processor at 72 MHz, 256 K Flash, 64 K RAM, 21 16 bit analog input and a 12 bits analog output, 3 hardware Serial ports, SPI & I2C, USB, and a total of 39 I/O pins. See the technical specifications for details.

Teensy-3.2 maintains the same form-factor as Teensy LC, with most pins offering similar peripheral features.

Dimensions : 35.6 mm x 17.8 mm

Drivers Download : Teensy Drivers