TopCatalogElectronic BoardsDiscontinued

SamD21 TM Wheel Converter
Accessories
Thrustmaster base cable
Push Button 12 mm
Rotary Switch 5 Positions
Encoder 20 detents / revolution
CTS Encoder 16 det/rev
Joycoder
Toggle switch (on)-off-(on)
Toggle switch on-on
Toggle switch on-off-on
CTS Encoder 16 det./rev + Button
Encoder 20 detents / revolution (D Shaft)
Options

Wheel Type :
Cable :

This board allows you convert Thrustmaster wheels into USB, You can also deal with Leds (up to 15) on Ferrari 488 challenge edition wheel, by choosing the Wheel Type option "With Leds".

 

This board is a SamD21 Mini board connected to the base thru a dupont or JST cable, depending on the wheel model (you must check what cable type you need before ordering).

SchematicsPinoutDimensionsWiringOptionsAccessories

     
    Wheel Type
    Display Package
    Display Package

    Package for Node Blue including modules to deal with RGB Leds in single, row or matrix fashion, LCD, OLED and Nextion Screens, and 7 segments displays. 

    Modules : 

    Nextion ili9341 SSD1306 Other
    Nextion
    NextionInterface
    NextionInterceptor
    NextionFilter
    SimHubLedsNextion
    NexButton
    NexGauge
    NexProgressBar
    NexSlider
    NexText
    NexWaveform
    NexTimer
    NexNumber
    NexDSButton
    NexCheckBox
    NexRadio
    NexScrollText
    NexPage
    		 Ili9341Interface
    SSD1306
    SSD1306Canvas
    Gadget
    FastLed
    MAX7219
    TM1637
    TM1638
    RGBLevel
    RGBStatus
     
     
    Cable
    JST 1.25 Cable 6 pins 10cm
    JST 1.25 Cable 6 pins 10cm

    JST 1.25mm Cable

    Number of pins : 6

    Length : 10cm

    Male Connector : seamed on the cable

     
    Board Version
    SamD21 Mini
    SamD21 Mini

    This board has been discontinued, it's been replaced by the SamD21 WB board, proposed here.

     

    The SamD21 Mini board brings you the power of a SamD21 in a small form factor, and has an on-board ICSP connector exposing a SPI interface that allows you to connect to various peripherals.

     

    Thanks to Node Blue, this board enables connecting buttons, switches, encoders, potentiometers,  rotary switches, joysticks  and various sensors.

    Microcontroller  SAMD21G18A Cortex-M0+ 32bit ARM MCU @ 48 MHz
    Board Power Supply (USB/VIN) 5 V
    Operating Voltage  3.3 V (Board Max Consumption 220 mA)
    Digital Input/output Pins 26 (including ICSP, I2C and A0-A5)
    Analog Input Pins 11 (12 bits ADC)
    Analog Output Pins 1 (10 bits DAC)
    External Interrupts 9 (0, 1, 4, 5, 6, 7, 8, A1, A2)
    Interfaces 3 UART, 2 SPI, 2 I2C, 1 I2S
    DC current per I/O Pin 7 mA
    Memory 256 KBytes Flash,32 KBytes SRAM
    EEPROM No (emulated with flash)

     

    Thrustmaster base cable
    Thrustmaster base cable

    This cable enables the connection of a SAMD21 TM board to a Thrustmaster base.

    Push Button 12 mm
    Push Button 12 mm

    Momentary push button (On)-Off (price is for one button)

    Black Metal case

    Drilling size : 12 mm

    Thread length : 7 mm

    Total Height : 21.5 mm

    Under Panel height : 15 mm

    External size : 17.5 mm

    Rotary Switch 5 Positions
    Rotary Switch 5 Positions

    Rotatry Switch 5 positions

     

    Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 power supply wires and the analog output.

    Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.

    Drill size : 9 mm

    You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62

     

    WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module

    This example will help you to get started easily: https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B5.txt

    Encoder 20 detents / revolution
    Encoder 20 detents / revolution

    Rotary Encoder 20 detents / revolution, 2 pulses / detent, with push button, mounted on a pcb.

    • Shaft Length: 15 mm (including the screw thread)
    • Shaft Diameter: 6 mm 
    • Bushing Material: Metal  
    • Panel mount, bushing Thread: M7 x 0.75  
    • Shaft type : crenellated
    • Body dimensions (without pins) :  12 x 12 x 6.5 mm
    • PCB dimensions : 18 x 23.5 mm, h 1mm
    • Detent torque : 60 gf.cm (0.8 oz.in)

     

    CTS Encoder 16 det/rev
    CTS Encoder 16 det/rev

    Rotary Encoder 16 detents / revolution, 1 pulses / detent

    • Shaft Length: 19.05 mm (0.75")
    • Bushing Length : 6.35 mm (0.250") 
    • Shaft Diameter: 6.35 mm (0.250") 
    • Bushing Material: Metal  
    • Panel mount, hole diameter : 9.5 mm
    • Bushing Thread: 3/8-32 UNEF-2A
    • Detent torque : 300 gf.cm (4.1 oz.in)

     

    Manufacturer : CTS

    Reference : 288T232R161A2

    Joycoder
    Joycoder

    This component combines a digital joystick with 4 directions, a Rotary Encoder with 30 detents / revolution (1 pulse / detent), and a push button. 

    • Shaft Length: 7 mm
    • Shaft Diameter: 2.5 mm 
    • Bushing Material: Metal  
    • Panel mount, bushing Thread of spacers : M3 x 4, central hole : 7mm

     

    Unlike competitors products that require 7 inputs, our Joycoder requires only 3 inputs on your board (one analog input for the 4 directions and the button, 2 digital inputs for the encoder). Another advantage is that the button is decoupled from the 4 directions.

     

    Pack content :

    - Component mounted on its board

    - Spacers and screws

    - Knob printed in PLA (optional)

    - Dupont to dupont 5 pins cable (optional)

     
    WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module along with one of our boards. We will not provide any support ouside of this environment.
    To start easily, you can refer to this NodeBlue example : https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Joycoder.txt
    Toggle switch (on)-off-(on)
    Toggle switch (on)-off-(on)

    Toggle Switch (on)-off-(on) (Type 123, 3 positions), with waterproof cap. (on) positions are momentary, return to center (off) is automatic.

     

     

     

    Nominal Curent : 6A

    Max voltage : 125V AC

    Toggle switch on-on
    Toggle switch on-on

    Toggle Switch on-on (Type 102, 2 positions), with waterproof cap

     

     

     

    Nominal Curent : 6A

    Max voltage : 125V AC

    Toggle switch on-off-on
    Toggle switch on-off-on

    Toggle Switch on-off-on (Type 103, 3 positions), with waterproof cap

     

     

     

    Nominal Curent : 6A

    Max voltage : 125V AC

    CTS Encoder 16 det./rev + Button
    CTS Encoder 16 det./rev + Button

    Rotary Encoder 16 detents / revolution, 1 pulses / detent, with push button

    • Shaft Length: 25.4 mm (1")
    • Shaft Diameter: 6.35 mm (0.250") 
    • Bushing Material: Metal  
    • Panel mount, hole diameter : 9.5 mm
    • bushing Thread: 3/8-32 UNEF-2A
    • Detent torque : 120 gf.cm (1.7 oz.in)

     

    Manufacturer : CTS

    Reference : 288V232F161B2

    Encoder 20 detents / revolution (D Shaft)
    Encoder 20 detents / revolution (D Shaft)

    Rotary Encoder 20 detents / revolution, 2 pulses / detent, with push button, mounted on a pcb.

    • Shaft Length: 15 mm (including the screw thread)
    • Shaft Diameter: 6 mm 
    • Bushing Material: Metal  
    • Panel mount, bushing Thread: M7 x 0.75  
    • Shaft type : D shape
    • Body dimensions (without pins) :  12 x 12 x 6.5 mm
    • PCB dimensions : 18 x 23.5 mm, h 1mm
    • Detent torque : 60 gf.cm (0.8 oz.in)